YANTAI STARK INSTRUMENT CO., LTD.

HL501 series magnet level transmitter are based on the principle of magnetostrictive. This meter has high stability, high accuracy, wide applications and so on. Compared with other principles of instrumentation, HL501 series have factors of not influenced by the characteristics of the dielectric constant, temperature, pressure, etc.

Main Features

Multifunction: separately or simultaneously measuring liquid level, interface location

High accuracy: ±1mm/0.01%F.S.

Wide range of application: installation is flexible and diversified

Multiple output mode: field display and remote electrical signal output

Low power consumption: two wire 4~20mA output, LCD display

Technical Parameters

Measuring range: 0~4m

Accuracy: ±0.8mm or 0.01%F.S.

Process pressure: -0.1~22MPa

Process temperature: -40~450℃

Process connection: flange, chuck, welding

Output: 4~20mA, HART is optional

Minimum current: 3.6mA

Max current: 22mA

Resolution: 1.6 μA

Delay: 0~40s

-LCD display: Optional

-Diameter: φ 10MM

Installation: buoy installation (side mounted, top mounted, bottom mounted)

Medium density: ≥0.38g/cm3

Medium viscosity: ≤0.4Pa·s

Probe type: cable

Probe material: 304SS (default)

316SS, pure titanium, titanium alloys (optional)

Power supply: 16~36VDC (standard)

21.6~26.4VDC (intrinsically safe)

Over Voltage Protection: CAT III

Reverse Polarity Protection: yes

Enclosure protection: IP67

ATEX: ExiaⅡCT4 (optional)

Installation

Dimensions